CAT 3126B Fault Code: 100-11 PID: Flash Code 46 SPN: 100 FMI: 18 Very Low Oil Pressure

The Engine Control Module (ECM) detects the following conditions:

The engine oil pressure is below the trip line in Illustration 1 for more than eight seconds.
The engine has been running for at least 18 seconds.
The ECM has been powered for at least three seconds.

Possible Causes:

1) Low oil in engine
2) Sensor installed improperly
3) If related codes for barometic pressure or boost pressure, fix those first
4) Pressure sensor wiring - Make sure you have 5V to the sensor
5) Manually check oil pressure and verify sensor is correct. If they are and still low oil pressure, you have a mechanical problem

CAT 3126B Fault Code: 128-04 PID: Flash Code 44 SPN: FMI: Secondary Fuel level voltage low

CAT 3126B Fault Code: 128-03 PID: Flash Code 44 SPN: FMI: Secondary Fuel Level voltage high

CAT 3126B Fault Code: 22-13 PID: Flash Code 42 SPN: 637 FMI: 13 Engine Speed Signal Calibration Not Performed

CAT 3126B Fault Code: 22-11 PID: Flash Code 42 SPN: 637 FMI: 11 Primary to Secondary Engine Speed Signal Calibration

If you want to know other articles similar to CAT 3126B Fault Code: 100-11 PID: Flash Code 46 SPN: 100 FMI: 18 Very Low Oil Pressure you can visit the category 3126B.

truckshd