Volvo All Engines (2013 Emissions) Fault Code: P114113 PID: EMS Buffered Idle Validation Switch Wire - ECM Side

Volvo All Engines (2013 Emissions) Fault Code: P114113 PID: EMS Buffered Idle Validation Switch Wire - ECM Side

The Idle Validation Switch is open at the idle position and transmits no voltage to the (VECU) Vehicle Electronic Control Unit. At approximately 1-13% pedal position the Idle Validation Switch closes and completes the circuit to the (VECU) Vehicle Electronic Control Unit.
The (VECU) Vehicle Electronic Control Unit then sends a voltage signal to the Engine Control Module (ECM) indicating accelerator pedal position. If both communication links (J1939, J1587) are faulty the pedal demand functionality enters limp-home. During limp-home the (IVS) Idle Validation Switch is used for ramping requested torque.

Conditions for diagnostic trouble code (DTC):
1) Accelerator pedal pressed down more than 50?%

Probable cause
1) Open circuit on signal wire
2) Connector
3) Accelerator pedal

Detailed information
1) The limp home mode does not function

If you want to know other articles similar to Volvo All Engines (2013 Emissions) Fault Code: P114113 PID: EMS Buffered Idle Validation Switch Wire - ECM Side you can visit the category All Engines (2013 Emissions).