Volvo Engine D12D AE E3 (Tier 3) Fault Code: SID22 FMI 3 Timing Sensor, Crank

Volvo Engine D12D AE E3 (Tier 3) Fault Code: SID22 FMI 3 Timing Sensor, Crank

DETECTION CONDITIONS:
The engine control unit (E-ECU) registers that the signal from the speed sensor is missing. (EA37/EA38)

SYMPTOM:
1. Engine runs rough/ varying engine speed.
2. Misfiring.
3. Engine stops/cannot be started (on condition that camshaft signal is also incorrect).

POSSIBLE CAUSES:
1. Positive cable short-circuited to voltage.
2. Positive cable short-circuited to frame ground.
3. Negative cable short-circuited to voltage.
4. Incorrectly installed sensor.
5. Open circuit on positive cable.
6. Open circuit on negative cable.
7. Short-circuit between cables or in component.
8. Loose connection.
9. Incorrectly installed sensor.
10. Defective sensor.

If you want to know other articles similar to Volvo Engine D12D AE E3 (Tier 3) Fault Code: SID22 FMI 3 Timing Sensor, Crank you can visit the category D12D AE E3 (Tier 3).