Cummins ISL CM850 (2003-06) Fault Code: 292 PID: 441 SPN: 441 FMI: 14 Auxiliary Temperature Sensor Input 1 - Special Instructions.

This fault code is activated when the temperature input from the OEM sensor exceeds the engine protection limit defined by the OEM. An engine power derate is possible depending on the OEM application.

Possible repairs:

1)The engine protection limit has been exceeded for the OEM supplied pressure or temperature input. Refer to the OEM troubleshooting manual.

Cummins ISL CM850 (2003-06) Fault Code: 291 PID: SID 248 SPN: 625 FMI: 9 Proprietary Datalink Error (OEM/Vehicle Datalink) ? Abnormal Update Rate. The ECM cannot communicate with the immobilizer anti-theft system.

Cummins ISL CM850 (2003-06) Fault Code: 288 PID: 29 SPN: 974 FMI: 19 SAE J1939 Multiplexing Remote Accelerator Pedal or Lever Data Error - Received Network Data Error. The OEM vehicle electronic control unit (VECU) detected a fault with the remote accelerator.

Cummins ISL CM850 (2003-06) Fault Code: 287 PID: 91 SPN: 91 FMI: 19 SAE J1939 Multiplexing Accelerator Pedal or Lever Sensor System Error - Received Network Data Error. The OEM vehicle electronic control unit (VECU) detected a fault with its accelerator pedal.

Cummins ISL CM850 (2003-06) Fault Code: 286 PID: SID 231 SPN: 639 FMI: 13 SAE J1939 Multiplexing Configuration Error - Out of Calibration. The ECM expected information from a multiplexed device but only received a portion of the necessary information.

If you want to know other articles similar to Cummins ISL CM850 (2003-06) Fault Code: 292 PID: 441 SPN: 441 FMI: 14 Auxiliary Temperature Sensor Input 1 - Special Instructions. you can visit the category Cumminz.

truckshd