PACCAR MX (2004 Emissions) Fault Code: P1580 Turbo Speed - Data Valid but Too High

PACCAR MX (2004 Emissions) Fault Code: P1580 Turbo Speed - Data Valid but Too High

SET CONDITIONS:
The PCI ECU (D420) detects that the turbo speed is above 140,000 rpm for more than 20 seconds.

DIAGNOSTIC CONDITION:
This diagnostic runs:
1. When engine speed is below 1900 rpm and
2. The engine is moderately loaded and
3. The VTG turbocharger position is greater than 10%

CORRESPONDING OBD READINESS MONITOR:
None

RESET CONDITION:
This DTC changes to inactive when the fault is no longer detected.

REPAIR VERIFICATION:
1. Clear all DTCs.
2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.
3. Did the DTC come back? (Can be pending, inactive or active)
- No, repair successful
- Yes, repair unsuccessful

POSSIBLE CAUSES:
1. Malfunction on the turbo-speed sensor wiring
2. Malfunction on the turbo-speed sensor

ADDITIONAL INFORMATION:
1. Turbo speed is measured by the turbo speed sensor (F683).
2. Engine torque is reduced when this DTC is active.

If you want to know other articles similar to PACCAR MX (2004 Emissions) Fault Code: P1580 Turbo Speed - Data Valid but Too High you can visit the category DTC TRUCKS.