PACCAR MX (2004 Emissions) Fault Code: P1180 Fuel Temperature - Data Valid but Too High, Moderately Severe

PACCAR MX (2004 Emissions) Fault Code: P1180 Fuel Temperature - Data Valid but Too High, Moderately Severe

SET CONDITIONS:
The PCI ECU (D420) detects that:
1. Fuel temperature is more than 95?C [203?F] and
2. Fuel pressure is too low and
3. Ambient temperature is more than 45?C [113?F] and
4. Fuel tank level is low

DIAGNOSTIC CONDITION:
This diagnostic runs continuously when the engine is running.

CORRESPONDING OBD READINESS MONITOR:
None

RESET CONDITION:
This DTC changes to inactive when the fault is no longer detected.

REPAIR VERIFICATION:
1. Clear all DTCs.
2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.
3. Did the DTC come back?
- No, repair successful
- Yes, repair unsuccessful

POSSIBLE CAUSES:
Fuel is hot due to low fuel tank level and high ambient temperatures.

ADDITIONAL INFORMATION:
1. The low-pressure fuel pressure is measured by the fuel pressure sensor (F801).
2. The low-pressure fuel temperature is measured by the fuel temperature sensor (F803).
3. Engine torque is reduced.

If you want to know other articles similar to PACCAR MX (2004 Emissions) Fault Code: P1180 Fuel Temperature - Data Valid but Too High, Moderately Severe you can visit the category DTC TRUCKS.