PACCAR MX (2004 Emissions) Fault Code: P0341 Camshaft Speed Signal - Out of Range During Engine Operation

PACCAR MX (2004 Emissions) Fault Code: P0341 Camshaft Speed Signal - Out of Range During Engine Operation

SET CONDITIONS:
The PCI ECU (D420) detects that the camshaft sensor signal is disturbed or intermittent.

DIAGNOSTIC CONDITION:
This diagnostic runs continuously when the engine is running.

CORRESPONDING OBD READINESS MONITOR:
None

RESET CONDITION:
This DTC changes to inactive when the fault is no longer detected.

REPAIR VERIFICATION:
1. Clear all DTCs.
2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.
3. Did the DTC come back?
- No, repair successful
- Yes, repair unsuccessful

POSSIBLE CAUSES:
1. Faulty camshaft sensor signal
2. Faulty camshaft sensor
3. Damaged pulse ring

ADDITIONAL INFORMATION:
1. Camshaft sensor (F558) is used to determine the position of the engine (cylinder detection).
2. Engine torque is reduced.

If you want to know other articles similar to PACCAR MX (2004 Emissions) Fault Code: P0341 Camshaft Speed Signal - Out of Range During Engine Operation you can visit the category DTC TRUCKS.