Isuzu 4HK1 (Tier 3) Fault Code P0205

Fault Code P0205 Open circuit in injection nozzle #5 drive system

Item To Be Detected:
Open/short circuit in electrical wiring No. 5 cylinder injector.

Preconditons When DTC is Set:
1) Main relay power supply voltage is 18V or more.
2) 70 rpm or more.
3) DTC P0612, P1262 or P0205 is not detected.

DTC Set Condition:
No injector 5 monitor input signal exists.

Fault Judgement Period:
Approx. 2.4 sec.

Behavior When Trouble Occurs:
1) Intensive engine vibration, rough idling, output lowering, blow up fault.
2) Back-up: injection for cylinder #5 stopped, EGR stopped.

Diagnosis Lamp: ON

Recovery From Failure: *1

Possible Causes:
1) Resistance more or less than specified value between coupling connector terminals.
2) Open circuit or high resistance between ECM and coupling connector.
3) Looseness in injector terminal nut.
4) Looseness or play in connection of coupling connector.
5) Open circuit or high resistance between injector terminal and coupling connector.
6) Loosness or play in connection of the ECM connector.
7) Bad No. 5 cylinder injector.
8) Bad ECM.

Isuzu 4HK1 (Tier 3) Fault Code P0203

Isuzu 4HK1 (Tier 3) Fault Code P0202

Isuzu 4HK1 (Tier 3) Fault Code P0206

If you want to know other articles similar to Isuzu 4HK1 (Tier 3) Fault Code P0205 you can visit the category TRUCK MANUALS.